NG Global

Project References

Dubai International Airport Expansion (AX324)
NG Global has over now 2 years of experience with AX 324, started our involvement with contractors at the pre-bid in July 2004. During pre-bid, NG Global was involved in technical review of specification of SAS/ELV Systems, raising RFI’s, coordination with multi vendors, techno-commercial evaluation. NG Global is currently in Thermo SAS/ELV Integration team at AX 324 site, facilitating workshops and coordination meetings, interfacing with client, consultants and various package managers and vendors. Our team developed a key tool in the Interface Coordination ‘e-DID’ Electronic Detailed Interface Document, which is used at site by client, consultant, subcontractors and various parties involved in the project.

NG Global provided dedicated technical engineers with SAS/ELV expertise to facilitate the identification, rationalization and close out internal and external AX project, interface through coordination meetings, workshops, interface documentation and final sign-off.

Burj Dubai
Developer : EMAAR
Main Contractor : Samsung/Besix/Arabtec
MEP : EVH ETA/Voltas/Hitachi Plant

When completed in 2008, Burj Dubai will hold the record in all four categories recognized by the New York-based global authority, Council on Tall Buildings and Urban Habitat. These records are: highest structure, roof, antenna and occupied floor. The 160-floor tower, designed by architect Adrian Smith for Chicago-based Skidmore, Owings and Merrill (SOM), is inspired from the geometrics of the desert flower and the patterning systems of Islamic architecture. At approximately 2,625 feet (800 meters) tall, it is just 15 feet (5 meters) short of a half-mile.

NG Global is currently providing BMS Expertise for EVH. NG Global was also involved with EVH at the Pre-bid stage in detailing the scope and vendor proposals.

New Doha International Airport, Qatar
Our services in DOHA International Airport included

    Pre Bid Consultancy
    Reviewing the specifications and requirements for the project.
    Selection of the vendors and specialists for the project.
    Detailed study of various specifications, vendors, submittals and drawings, to suggest the best possible solution that fits the requirement.
Value Engineering

Hyderabad International Airport, India
    Pre Bid Consultancy
    Reviewing the specifications and requirements for the project.
    Selection of the vendors and specialists for the project.
    Detailed study of various specifications, vendors, submittals and drawings, to suggest the best possible solution that fits the requirement.
    Value Engineering

Atlantis – The Palm, Dubai
    Pre Bid Consultancy
    4 Kilometer Span Water park
    Proprietary systems interfacing with the BMS system
    Value Engineering
    Estimation for the ELV systems
    Detailed study of systems, vendors and submittals to provide the best solution to the MEP contractor.

One Central Park, DIFC, Dubai
    Bid Consultancy
    80 Floors
    Proprietary systems interfacing with the BMS system
    30 Floors of Office Space
    1/2/3 Bed Apartments
    Penthouses
    Home Automation systems
    Very extensive integration in the penthouses between home automation, structured cabling, building management system, access control, Audio video and the CCTV.

Ritz Carlton Hotel, DIFC, Dubai
    Pre Bid Consultancy
    Vendor Evaluation / Systems Evaluation
    Opening 2008
    Consists of Serviced apartments and Unserviced Apartments
    Value Engineering done on the systems

Harbor Plaza, Dubai Festival City, Dubai
    Pre Bid Consultancy
    Intercontinental Hotel and Managed Apartments
    Includes all the ELV Systems in a Hotel and Residential Apartments
    Spec from consultant and Intercontinental Hotel Guideline.
    First Project within the Zone 2B of the Festival City campus.
    Campus wide BMS for integration and Easy Facility Management.

West bay Office Tower, Doha Qatar
Contractor : Drake and Scull (UK).
Scope : Barcol Air Induction VAV Boxes and Controls
Quantity : 1000 Boxes + Controls.

Barcol Air Induction VAV boxes are designed to use the duct static pressure to induce return air flow from the plenum and maintain the flow at the diffusers. This avoid cold air dumping and create high quality indoor climate. The advantages with induction VAV boxes are elimination of a fan, which reduces cost of the box, eliminate the power requirements for the fan as well as reduces the maintenance for the fan. Indction VAV is preferred against the fan powered box due to the cost advantage as well as less noise. Barcol Air factory provides pre-fitted BACnet or LON Controls, fitted and calibrated at the factory that network and transfer data with all BMS systems.

Bahrain Financial Harbour in Bahrain
Cotractor : Al Hamed Contracting.
Consultants : Gemac, Bahrain.
Scope of work : Barcol Air Induction VAV Boxes + BACnet Controls.
Quantity : 2000 VAV Boxes + BACnet Controls

Barcol Air Induction VAV boxes are used in this project. Induction VAV boxes uses the duct static pressure to induce return air flow from the plenum and maintain the flow at the diffusers. The induction type VAV boxes preferred to Fan powered, since there are no fans used in Induction VAV which reduces the cost of the box, eliminate the power requirements for the fan as well as reduces the maintenance aspects. Induction VAV boxes are quiet in operation. In this project, Barcol Air has supplied with pre-fitted BACnet controllers, fitted and calibrated at the factory that network and transfer data with all BMS systems. The BMS system in this project is Johnson controls that is integrated with Barcol Air BACnet VAV Boxes.

Hotel Shangrila, Dubai
Contractor : Habtoor / Sensire
Consultants : NORR Consultants, Canada
Scope : Barcol Air VAV Boxes + LON Controls

Barcol Air has supplied with pre-fitted LON VAV controllers, fitted and calibrated at the factory that network and transfer data with all BMS systems. The BMS system in this project is TAC (Tour and Anderson) that is integrated with Barcol Air LON VAV Boxes.

Takreer Atheer HQ Building in Abu Dhabi
Contractors : Emirates Trading Agency (ETA)
Consultants : WS Atkins (UK).
Scope : Pressure Independent VAV Boxes (factory fitted Conrols)

Barcol Air VAV Boxes are well known for the Low Noise levels and this prestigious project has been acknowledged for the high quality Indoor Climate control as well as extremely quiet indoor conditions. Barcol Air has over 20,000 installations in the Middle East and preferred as the quality buildings such as head quarter Buildings.

Business park in Dubai (Emaar)
Client : EMAAR
Consultants : Ian Banham and Associated, Dubai
Contractors : Juma Al Majid.
Quantity : 2000 Boxes (pre-fitted with controls)

Barcol Air Induction VAV boxes are used in this project. Induction VAV boxes uses the duct static pressure to induce return air flow from the plenum and maintain the flow at the diffusers. The induction type VAV boxes are preferred to Fan powered, since there are no fans used in Induction VAV boxes. Due to which, the box cost less, eliminate the power requirements for the fan as well as reduces the maintenance aspects. Induction VAV boxes are quiet in operation.

Other Projects (click on the titles below for descriptions of each projects)

     • Irrigation projects in UAE
     • Integrated Building management, Dubai Media City
     • Water Distribution Monitoring and Control
     • Gas Distribution Monitoring and Control
     • Remote control of heated switch points for Swiss Railway
     • Telecontrol of Heating Substations
     • Telecontrol of Electricity Consumption and Refrigeration
     • Wind Power Turbine Generators
     • Remote Magnet Monitoring in Hospitals
     • Solar Energy for Building Automation
     • Aqua Farming Monitoring
     • Hydropower installation Monitoring
     • ELF Nigeria Accommodation Platform